| RHP LJ7.1/2M Single Row Ball Bearings | Z:35,5 mm; F:16 mm; G:13 mm; Bore Diameter (mm):20; A:130 mm; D:68 mm; B:35 mm; Bearing number:UKFL205; Brand:CX; Bolt (G):M14; |
| RHP SFT1.15/16EC Bearings | d:28 mm; KBRG:8353; r min.:0,3 mm; Bearing number:NA59/28; r:0.3; OIL rpm:13000; da_max:43; B_:23; Outer Diameter (mm):45; C1_:23; |
| RHP SLC45A Bearings | r1(min):1.5; ra max.:2 mm; a(mm):16.9; Size (mm):35x80x22.75; Bearing number:30307JR-1; C0r:78.9; (Grease) Lubrication Speed:5200 r/min; Da max.:70 mm; B:21 mm; Width (mm):22,75; |
| RHP FC2.7/16 Bearings | rmin:1,1 mm; Inner Race Width:0.787 Inch | 20 Mill; Width (mm):20; Bearing number:210-NPP-B; DSP:90 mm; B:20 mm; Mounting Method:Shaft; Internal Clearance:C0-Medium; d:50 mm; Bore Diameter (mm):50; |
| RHP LRJA8.1/2M Bearings | Basic static load rating C0:0.815 kN; Harmonized Tariff Code:8482.10.50.68; Da - max.:22 mm; Weight / LBS:0.036; r1,2 - min.:0.3 mm; ra max.:0.3 mm; Outer Race Width:0.276 Inch | 7 Milli; D2 ≈:20.48 mm; EAN:7316572559420; ra - max.:0.3 mm; |
| RHP 6012TCG12P4 Precision Ball Bearings | R:584.2 mm; Lockplate:P 750; Diameter S-3:736.60 mm; F:108.00 mm; Relief Diameter A:738.68 mm; S3:50.8 mm; C1:870.08 mm; Threads No. per Inch:3; Locknut:N 750; G:56.64 mm; |
| RHP 1145-1.3/4DEC Bearings | Groove Width A:17 mm; Enclosure:Open; Axial Load Factor Y2:2.59; Bore Type:Tapered Bore; Static Load Rating:1,810,000 N; Hole Diameter (do):10 mm; Nr. of Holes:6; da (min):172 mm; Fillet Radius/Chamfer:2.1 mm; Dynamic Load Rating:1,450,000 N; |
| RHP LJ2JC3 Single Row Ball Bearings | Bearing No.:NUP2206R; db(min):34; (Refer.)Mass(kg):0.278; r1(min):0.6; Size (mm):30x62x20; da(min):35; Ew:-; Weight:0.262 Kg; C0r:49.8; Da(max):57; |
| RHP 22232KMW33 Bearings | Separable:No; Noun:Bearing; Weight:0,056 Kg; Bore:1.25 Inch | 31.75 Mi; Harmonized Tariff Code:8482.40.00.00; Retainer:Yes; Basic static load rating (C0):71 kN; Minimum Buy Quantity:N/A; Other Features:1 Rib Outer Ring | D; |
| RHP 21312KJC3 Bearings | Reference speed:1000 r/min; db min:236 mm; Calculation factor (Y1):1,6; r5 min.:1 mm; Calculation factor (Y0):1,6; D:340 mm; Fatigue load limit (Pu):300; d1:280 mm; d:220 mm; r1 min.:4 mm; |